IDAS Image

digital Repeaters IC-FR5000 IC-FR6000

Manual
Brochure

Features

  • Frequency coverage : 136-174, 400-470, 450-512, 450-520, 350-400MHz
  • Number of channels : Max. 32 channels
  • 19-inch rack mount design, 2U height low profile design
  • 12-digit dot-matrix display and 32 memory channels
  • Multiple CTCSS, DTCS tone and digital RAN code decode
  • 50W output power at 50% duty operation, 25W at 100% duty operation*
    (* Ambient temperature: 25°C)
  • Optional UR-PA5000 or UR-PA6000 power amplifier provides 100W output at 50% duty cycle, 50W at 100% duty cycle operation*
    (Ambient temperature: 25˚C)
    *
    UR-PA5000/UR-PA6000 is not available in some countries. (Not available in the USA.)
  • "2 channel in 1 box" configuration (Optional UR-FR5000/UR-FR6000 required)
  • 5-Tone and DTMF encoder/decoder (For analog FM mode)
  • Accessory connector (D-sub 25-pin) for connecting analog trunking
  • Controllers or other external devices

Two RF modules in one unit

Web browser configuration

The IC-FR5000 series uses only 2U height and has an internal space for installing another RF module. The optional UR-FR5000 series RF module can be installed in the chassis to save installation space.


*
For a two channel IDAS™ trunking repeater, an optional UC-FR5000 is required for each channel.

Specifications

GENERAL

IC-FR5000

IC-FR6000

Frequency coverage
(Varies according to version)
136-174 MHz 400-470 MHz
450-512 MHz
450-520 MHz
350-400MHz (Non - FCC)
Number of channels 32 ch
Channel spacing
(Varies according to version)
6.25/12.5/25 or 7.5/15/30 kHz
Type of emission 16K0F3E,
11K0F3E,
11K0F7E/D/W,
8K50F3E
(EXP version only),
4K00F1E/D,
4K00F3E
16K0F3E,
11K0F3E,
11K0F7E/D/W,
4K00F1E/D,
4K00F3E
Power supply requirement 13.6V DC
Current drain Tx High 15A
Rx Stand-by 400mA*1
Max. audio 1900mA
Dimensions
(projections not included; W×H×D)
483×88×260 mm
19.02×3.46×10.24 in
Weight (approx.) 5.6kg; 12.3lb
*1
Repeater operation only.

TRANSMITTER

IC-FR5000

IC-FR6000

RF output power 50W
Spurious emissions 80dB
Frequency stability ±0.5ppm
Audio harmonic distortion 1% typical
40% deviation
FM Hum and Noise 52dB typ. (W)
49dB typ. (N)
50dB typ. (W)
45dB typ.
Digital FSK error 5% max.

RECEIVER

IC-FR5000

IC-FR6000

Sensitivity FM at 12dB SINAD 0.25µV (typ.)
Digital at 5% BER 0.20μV (typ.)
Adjacent channel selectivity (W/N) 78/56dB typ.
Spurious response rejection 90dB typ.
Intermodulation rejection 78dB typ.
AF output power
(at 5% distortion with an 8Ω load)
4.0W (typ.) with a 4Ω load
Measurements made in accordance with TIA-603 (for Analog FM).
All stated specifications are subject to change without notice or obligation.

Previous More Details (Global Site)
bottom