HOME > Products > Amateur > HF > IC-7600

IC-7600


zoom brochure (PDF)Manual (PDF)

General

Frequency coverage:
U.S.A. version (#02)
Rx :
0.030– 60.000MHz*1

Tx :
1.800– 1.999MHz 3.500– 3.999MHz
5.255– 5.405MHz*1 7.000– 7.300MHz
10.100– 10.150MHz 14.000– 14.350MHz
18.068– 18.168MHz 21.000– 21.450MHz
24.890– 24.990MHz 28.000– 29.700MHz
50.000– 54.000MHz
Frequency coverage :
Europe (#03), Europe-1 (#04) version
Rx
0.030– 60.000MHz*1

Tx
1.810– 1.999MHz 3.500– 3.800MHz
7.000– 7.100MHz (Europe version only)
7.000– 7.200MHz (Europe-1 version only)
10.100– 10.150MHz 14.000–14.350MHz
18.068– 18.168MHz 21.000–21.450MHz
24.890– 24.990MHz 28.000–29.700MHz
50.000– 52.000MHz
Modes LSB, USB, CW, RTTY, PSK31, AM, FM
Number of memory channels 101 (99 regular, 2 scan edges)
Antenna impedance 50Ω unbalanced (Tuner off)
Antenna connector SO-239×2 and RCA ×1 (RX only)
Power supply requirement 13.8V DC±15%
Temperature range 0°C to +50°C; +32°F to +122°F
Frequency stability Less than ±0.5ppm (0°C to +50°C)
Frequency resolution 1Hz (minimum)
Power consumption Rx
Stand-by 3.0A (typ.)
Max. audio 3.5A (typ.)

Tx
Max. power 23A
Dimensions (W×H×D)
(projections not included)
340×116×279.3 mm;
13.39×4.57×11 in
Weight (approx.) 10kg; 22.0lb
*1 Some frequency bands are not guaranteed.

Transmitter

Output power
(continuously adjustable)
SSB, CW, FM, RTTY, PSK31 :
2–100W

AM :
1–30W
Modulation system SSB :
Digital PSN modulation

FM :
Digital phase modulation

AM :
Digital low power modulation
Spurious emission HF bands :
Less than -50dB

50MHz bands :
Less than -63dB
Carrier suppression More than 40dB
Unwanted sideband suppression More than 55dB
Microphone impedance 600Ω (8-pin connector)

Receiver

Receive system Double conversion
super-heterodyne system
Intermediate frequencies 1st : 64.455MHz
2nd : 36kHz
Sensitivity (typical) SSB, CW, RTTY (BW : 2.4kHz at 10dB S/N)
1.8–29.995MHz 0.15μV *1
50.0–54.0MHz 0.12μV *2

AM (BW : 6kHz at 10dB S/N)
0.1–1.8MHz 6.3μV *1
1.8–29.995MHz 2.0μV *1
50–54.0MHz 1.6μV *2

FM (BW : 15kHz at 12dB SINAD)
28–29.97MHz 0.5μV *1
50.0–54.0MHz 0.32μV *2
Squelch sensitivity
(Preamp: ON, Threshold)
SSB
Less than 3.2 μV

FM
Less than 0.3 μV
Selectivity (filter shape: sharp) SSB (BW : 2.4kHz)
More than 2.4kHz/–6dB
Less than 3.8kHz/–60dB

CW (BW : 500Hz)
More than 500Hz/–6dB
Less than 900Hz/–60dB

RTTY (BW : 350kHz)
More than 350Hz/–6dB
Less than 650Hz/–60dB

AM (BW : 6kHz)
More than 6.0kHz/–6dB
Less than 15kHz/–60dB

FM (BW : 15kHz)
More than 12kHz/–6dB
Less than 20kHz/–60dB
Spurious and image rejection ratio More than 70dB (Except 50MHz through point)
Audio output power More than 2.0W at 10% distortion with an 8Ω load
RIT variable range ±9.999kHz
PHONES connector 3-conductor 6.35 (d) mm (1⁄4″)
EXT SP connector 2-conductor 3.5 (d) mm (1⁄8″) /8Ω
*1 Preamp-1 : ON
*2 Preamp-2 : ON

Antenna tuner

Matching range HF bands :
16.7Ω to 150Ω unbalanced*1

50MHz band :
20Ω to 125Ω unbalanced *2
Minimum operating power HF bands :
8W

50MHz band :
15W
Tuning accuracy VSWR 1.5:1 or less
(Motor stopped)
Insertion loss Less than 1.0dB
(after tuning at 100W output)
*1Less than VSWR 3:1
*2Less than VSWR 2.5:1

All stated specifications are subject to change without notice or obligation.