 |
|
   |
General
IC-A15 |
IC-A15S |
|||
|---|---|---|---|---|
| Frequency range | 118.000–136.975MHz (COM) |
|||
| Number of memory channels | 200 channels with 10 banks |
100 channels | ||
| Channel spacing | 25kHz |
|||
| Power supply requirements | 7.4V DC (Icom battery pack) |
|||
| Current drain | Tx | 1.5A typ. |
||
| Rx | Stand-by | 50mA typ. |
||
| Max. audio | 500mA typ. |
|||
| Dimensions (W×H×D) (Projections are not included) |
53×120×36.9 mm |
|||
| Weight | 350g (with antenna and BP-232N) |
|||
| Operating temperature range | –20°C to +55°C |
|||
| Frequency stability | ±5ppm |
|||
Transmitter
IC-A15 |
IC-A15S |
|
|---|---|---|
| RF output power | 5.0/1.5W typ. (PEP/CW) |
|
| Microphone impedance | 3-conductor 2.5 (d) mm (1/10”)/ 150Ω |
|
Receiver
IC-A15 |
IC-A15S |
|
|---|---|---|
| Sensitivity | –3dBμ typ. (at 12dB SINAD with CCITT) |
|
| Selectivity | 6dB (More than 7.5kHz) 60dB (Less than 25kHz) |
|
| Spurious response rejection | More than 70dB |
|
| Audio output power (at 10% distortion with an 8Ω load, 30% modulation) |
Internal speaker More than 700mW External speaker More than 500mW |
|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F Method, Proc. |
|---|---|
| Low Pressure Storage | 500.4 I |
| Low Pressure Operation | 500.4 II |
| High Temperature Storage | 501.4 I |
| High Temperature Operation | 501.4 II |
| Low Temperature Storage | 502.4-3 I |
| Low Temperature Operation | 502.4-3 II |
| Temperature Shock | 503.4 I |
| Solar Radiation | 505.4 I |
| Rain Blowing | 506.4 I |
| Rain Drip | 506.4 III |
| Dust Blowing | 510.4 I |
| Vibration | 514.5 I |
| Shock Functional | 516.5 I |
| Shock Transit Drop | 516.5 IV |
| Ingress Protection Standard | |
|---|---|
| Water | IPX4(Water resistant protection) |
All stated specifications are subject to change without notice or obligation.