HOME > Products > Land Mobile > Analog Transceivers > IC-V86, IC-U86

IC-V86

IC-V86
IC-V86
vhf
IC-U86
uhf
zoombrochure (PDF)Manual (PDF)

General

 

IC-V86

IC-U86

Frequency range
(TX/RX guaranteed range)
136–174 MHz
(EX Hi power TX :
144–160 MHz)
EXP1 : 400–472 MHz
(EX Hi power TX : 430–450 MHz)
EXP2 : 330–400 MHz
(EX Hi power TX : 335.4–380 MHz)
Type of emissions
F2D, F3E (FM, FM-N)
Number of channels
207 channels (200 memory channels, 1 call channel and 6 scan edges)
Antenna impedance
50Ω
Power supply requirement
7.5V DC
Operating temperature range
–20 ˚C to +60 ˚C, –4 °F to +140 °F
Frequency stability
±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F)
Current drain TX
(EX Hi/Hi/Mid/Low)
1.6/1.4/1.0/0.5 A typical 1.6/1.5/1.0/0.5 A typical
RX
(Max. audio)
450 mA typ. (INT SP),
200 mA typ. (EXT SP)
450 mA typ. (INT SP),
200 mA typ. (EXT SP)
Dimensions (W×H×D)
(Projections not included)
58.6 × 112 × 30.5 mm,
2.3 × 4.4 × 1.2 in
(with BP-298)
Weight (Approximate)
300 g, 10.6 oz
(with BP-298, FA-B57V)
290 g, 10.2 oz
(with BP-298, FA-B57U)

Transmitter

 

IC-V86

IC-U86

Output power
7.0/5.5/2.5/0.5 W
(EX Hi/Hi/Mid/Low)
5.5/4/2/0.5 W
(EX Hi/Hi/Mid/Low)
Maximum frequency deviation
±5.0 kHz/±2.5 kHz (Wide/Narrow)
Spurious emissions
Less than –60 dB
External microphone connector
3-conductor 2.5 (d) mm (1/10")/2.2 kΩ

Receiver

 

IC-V86

IC-U86

Sensitivity
–124 dBm typical
–121 dBm typical
Squelch sensitivity
–126 dBm typical
–123 dBm typical
Selectivity (Wide/Narrow)
75 dB typical/
70 dB typical
70 dB typical/
68 dB typical
Intermodulation
65 dB typical
Audio output power Internal SP
1500 mW typical (with 8 Ω load)
External SP
550 mW typical (with 8 Ω load)
External speaker connector
3-conductor 3.5(d)mm (1/8″)/8Ω

Applicable U.S. Military Specifications

Standard
MIL-810 G
Method
Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Vibration 514.6 I
Shock 516.6 I, IV
Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Applicable IP Rating

Ingress Protection Standard
Dust and Water IP54 (Dust-protection, water resistance)
All stated specifications are subject to change without notice or obligation.