![]() |
|
![]() ![]() ![]() |
General
IC-F3001 |
IC-F4001 |
|||
|---|---|---|---|---|
| Frequency range (Varies according to version) |
136MHz–174MHz |
400MHz–470MHz 450MHz–512MHz |
||
| Number of memory channels | 16 channels |
|||
| Channel spacing (Varies according to version) |
12.5kHz/25kHz 15kHz/30kHz |
12.5kHz/25kHz |
||
| Type of emission | 16K0F3E/11K0F3E |
|||
| Current drain | Tx | 1.3A |
||
| Rx | Stand-by | 75mA |
70mA |
|
| Max. audio | 330mA (Internal SP) |
|||
| Dimensions (W×H×D) (Projections are not included) |
58×111×31 mm;
2 9⁄32 × 4 9⁄8 × 1 7⁄32 in (With BP-264) 58×111×35.5 mm; 2 9⁄32 × 4 9⁄8 × 1 13⁄32 in (With BP-265) |
|||
| Weight | 330g; 11.6oz (With BP-264) 270g; 9.5oz (With BP-265) |
|||
Transmitter
IC-F3001 |
IC-F4001 |
|
|---|---|---|
| RF output power (at 7.2V DC)) | 5W, 2W, 1W (Hi, L2, L1) |
4W, 2W, 1W (Hi, L2, L1) |
| Spurious emissions | 70dB min. |
|
| Frequency stability | ±2.5ppm |
|
| Audio harmonic distortion (W/N) | 1.0%/1.5% (typ.) |
|
| FM Hum and Noise (W/N) | 46dB/40dB (typ.) |
|
Receiver
IC-F3001 |
IC-F4001 |
||
|---|---|---|---|
| Sensitivity at 12dB SINAD | 0.25μV (typ.) |
||
| Adjacent channel selectivity (W/N) | 78dB/70dB (typ.) |
73dB/65dB (typ.) |
|
| Spurious response rejection | 70dB (min.) |
||
| Intermodulation rejection | 75dB (typ.) |
74dB (typ.) |
|
| AF output power (at 5% distortion ) |
Internal SP (With 12Ω load) |
800mW (typ.) |
|
| External SP (With 8Ω load) |
400mW (typ.) |
||
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F Method, Proc. |
|---|---|
| Low Pressure Storage | 500.4 I |
| Low Pressure Operation | 500.4 II |
| High Temperature Storage | 501.4 I |
| High Temperature Operation | 501.4 II |
| Low Temperature Storage | 502.4-3 I |
| Low Temperature Operation | 502.4-3 II |
| Temperature Shock | 503.4 I |
| Solar Radiation | 505.4 I |
| Rain Blowing | 506.4 I |
| Rain Drip | 506.4 III |
| Humidity Induced | 507.4 |
| Salt Fog | 509.4 |
| Dust Blowing | 510.4 I |
| Vibration | 514.5 I |
| Shock Functional | 516.5 I |
| Shock Transit Drop | 516.5 IV |
Ingress Protection Standard
| Dust & Water | IP54 (Dust-protection and water resistant) |
|---|
All stated specifications are subject to change without notice or obligation.




