HOME > Products > Land Mobile > Handheld > IC-F9011T/S/B, IC-F9021T/S/B

IC-F9011T/S/B

IC-F9011T/S/B
IC-F9011T
vhfp25 digital10keypad
IC-F9011S
vhfp25 digitalSimple key
IC-F9011B
vhfp25 digital
IC-F9021T
vhfp25 digital10keypad
IC-F9021S
vhfp25 digitalSimple key
IC-F9021B
vhfp25 digital
zoombrochure (PDF) Manual (PDF)

GENERAL

 

IC-F9011T/S/B

IC-F9021T/S/B
Frequency range
(Varies according to version)
136–174MHz
380-470MHz
450-520MHz
Number of memory channels
Max. 512 channels/128 zones
Channel spacing
(Varies according to version)
15kHz/30kHz (analog)
12.5kHz (digital)
12.5/25kHz (analog)
12.5kHz (digital)
Type of emission
16K0F3E, 11K0F3E,
8K10F1E, 8K10F1D
Current drain Tx
2.2A
2.1A
Rx Stand-by
300mA (Backlight off)
Max. audio
800mA (Backlight off)
Dimensions (W×H×D)
(Projections are not included)
58.6×167×41.8 mm;
25⁄16 ×69⁄16 ×121⁄32 in　(with BP-254)
Weight
533g; 1.17lb (with BP-254)

TRANSMITTER

 

IC-F9011T/S/B

IC-F9021T/S/B
RF output power (High)
6W
5W
Spurious emissions
75dB (typ).
80dB (typ).
Frequency stability
±1.0ppm
Audio harmonic distortion
2% typical
40% deviation
FM Hum and Noise
45dB typ. (W)
40dB typ. (N)

RECEIVER

 

IC-F9011T/S/B

IC-F9021T/S/B
Sensitivity Analog
0.25μV (typ). (at 12dB SINAD)
Digital
0.30μV (typ). (at 5% BER)
Adjacent channel selectivity Analog
(W/N)
75/48dB (typ). (TIA/EIA603B)
80/70dB (typ). (TIA/EIA603)
75/50dB (typ). (TIA/EIA603B)
76/70dB (typ.) (TIA/EIA603)
Digital
60dB (typ).
Spurious response rejection
80dB (typ.)
Intermodulation rejection
75dB (typ).
AF output power
(at 10% distortion with an 8Ω load)
1.0W (typ).

Applicable U.S. Military Specifications & IP Rating

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.

Standard MIL-810 F
Method, Proc.
High Temperature Storage
501.4 I
High Temperature Operation
501.4 II
Low Temperature Storage
502.4 I
Low Temperature Operation
502.4 II
Temperature Shock
503.4 I
Solar Radiation
505.4 I
Rain Blowing
506.4 I
Rain Drip
506.4 III
Humidity Induced
507.4
Salt fog
509.4
Dust Blowing
510.4 I
Water Immersion
512.4 I
Vibration
514.5 I
Shock Functional
516.5 I
Shock Transit Drop
516.5 IV
Also meets equivalent MIL-STD-810 -C, -D and -E.

Ingress Protection Standards
Dust & Water
IP57 (Dust-protection and waterproof protection)

All stated specifications are subject to change without notice or obligation.
Top of Page