HOME > Products > Land Mobile > IDAS Digital Transceivers > IC-F5123D, IC-F6123D

IC-F5123D, IC-F6123D

photo
IC-F5123D(50W/25W)
vhfidas digital
IC-F6123D(45W/25W)
uhfidas digital
zoombrochure (PDF)Manual (PDF)

General

 

IC-F5123D

IC-F6123D

Frequency coverage
136-174MHz
350-400MHz
400-470MHz
450-512MHz
Number of channels
128 channels (8 zones)
Channel spacing
6.25/12.5/25kHz
Type of emission
16K0F3E, 8K50F3E, 4K00F1E/F1D
Current drain
(approx.)
Tx 50W/45W
10A
11A
25W
5A
Rx Stand-by
300mA
Max. audio
1.2A
Dimensions
(projections not included;
W×H×D)
50W/45W version
150×40×167.5 mm;
5.91×1.57×6.59 in
25W version
150×40×117.5 mm;
5.91×1.57×4.63 in
Weight 50W/45W version
1.1kg; 2.4lb
25W version
0.8kg; 1.8lb

Transmitter

 

IC-F5123D

IC-F6123D

RF output power 50W/45W version
50W, 25W, 5W
(Hi, L2, L1)
45W, 25W, 5W
(Hi, L2, L1)
25W version
25W, 10W, 2.5W
(Hi, L2, L1)
25W, 10W, 2.5W
(Hi, L2, L1)
Spurious emissions
70dB (min.)
Frequency stability
±1.0ppm
Audio harmonic distortion
3% typical
40% deviation
FM Hum and Noise
46/40dB typ. (Wide/Narrow)

Receiver

 

IC-F5123D

IC-F6123D

Sensitivity
0.25μV typ. (at 12dB SINAD)
0.18μV typ. (at 5% BER)
Adjacent channel selectivity
80/70dB typ. (W/N),
65dB typ. (digital)
75/65dB typ. (W/N),
60dB typ. (digital)
Spurious response rejection
70dB min.
Intermodulation rejection
75dB typ. (W/N),
70dBμV emf type. (digital)
AF output power
(at 5% distortion with an 4Ω load)
4W (typ.)

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 F
Method, Proc.
Low Pressure Storage
500.4 I
Low Pressure Operation
500.4 II
High Temperature Storage
501.4 I
High Temperature Operation
501.4 II
Low Temperature Storage
502.4 I
Low Temperature Operation
502.4 II
Temperature Shock
503.4 I
Solar Radiation
505.4 I
Humidity Induced
507.4
Settling Dust
510.4 III
Vibration
514.5 I
Shock Functional
516.5 I
Shock Transit Drop
516.5 IV

Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.