HOME > Products > Land Mobile > IDAS Digital Transceivers > IC-FR5000, IC-FR6000

IC-FR5000, IC-FR6000

photo
IC-FR5000(dPMR Version)
vhfidas
IC-FR6000(dPMR Version)
uhfidas
zoom Manual (PDF)

General

 

IC-FR5000

IC-FR6000

Frequency coverage
(Varies according to version)
136-174 MHz
400-470 MHz
Number of channels
32 ch
Channel spacing
(Varies according to version)
6.25/12.5/25 or 7.5/15/30 kHz
Type of emission
16K0F3E,
11K0F3E,
11K0F7E/D/W,
8K50F3E,
4K00F1E/D,
4K00F3E
16K0F3E,
11K0F3E,
11K0F7E/D/W,
4K00F1E/D,
4K00F3E
Power supply requirement
13.6V DC
Current drain
(at 13.6V DC)
Tx High
15A
Rx Stand-by
400mA*1
Max. audio
1900mA
Dimensions
(projections not included; W×H×D)
483×88×260 mm
19.02×3.46×10.24 in
Weight (approx.)
5.6kg; 12.3lb
*1 Repeater operation only.


Transmitter

 

IC-FR5000

IC-FR6000

RF output power (High)
50W
Spurious emissions
80dB
Frequency stability
▒0.5ppm
Audio harmonic distortion
1% typical
40% deviation
FM Hum and Noise
52dB typ. (W)
49dB typ. (N)
50dB typ. (W)
45dB typ. (N)
Digital FSK error 5% max.


Receiver

 

IC-FR5000

IC-FR6000

Sensitivity FM at 12dB SINAD
0.25ÁV (typ.)
Digital at 5% BER
0.20μV (typ.)
Adjacent channel selectivity (W/N)
78/56dB typ.
Spurious response rejection
90dB typ.
Intermodulation rejection
78dB typ.
AF output power (at 5% distortion)
4.0W (typ.) with a 4Ω load

FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS

 

IC-FR5000
IC-FR6000

dPMR™ Mode 1/Mode 2
available
Mode 2 Multi-site
UC-FR5000*2
(#12 required)
Mode 3 Trunking
UC-FR5000SE*3
Voice Scrambler (Digital)
available
Voice Scrambler
(Analgue)*1
Inversion
available
CTCSS/DTCS encoder
available
decoder
available
5-Tone encoder
available
decoder
available
DTMF autodial
available
DTMF decoder
available
BIIS 1200
-
MDC 1200  
-
*1 Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
*2 IC-FR5000/FR6000 Mode 2 version only.
*3 IC-FC5000E external controller required. The IC-FR5000/FR6000 cannot be used as a base station in dPMR Mode 3.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 F
Method, Proc.
High Temperature Storage
501.4 I
High Temperature Operation
501.4 II
Low Temperature Storage
502.4 I
Low Temperature Operation
502.4 II
Vibration
514.5 I
Shock Functional
516.5 I

All stated specifications are subject to change without notice or obligation.