HOME > Products > Land Mobile > IDAS Digital Transceivers > IC-FR5200H, IC-FR6200H (NXDN Version)

IC-FR5200H, IC-FR6200H (NXDN Version)

photo
IC-FR5200H (NXDN Version)
vhfidas
IC-FR6200H (NXDN Version)
uhfidas
zoombrochure (PDF)Manual (PDF)

MIL-STD 810MIL-STD 810

50W Full Duty Cycle Digital Repeater

50W 100% Duty Cycle Operation

Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FR5200H series provides a reliable 100% duty cycle operation at 50W output.

IDAS, Analog FM and Mixed Mode

The IC-FR5200H series is compatible with both analog FM mode and IDAS conventional and NXDN™ Type-D trunking* mode. Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and IDAS conventional modes and to transmit either mode depending on the received signal.

* Type-D Trunking and network controller functions are not available, depending on version.

32 Channel Capacity and 5 Programmable Buttons

The 12-digit dot-matrix display, 5 programmable buttons, 32 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. LEDs on the front panel show channel conditions.

Built-in Type-D Trunking and Network Controller*

The Type-D multi-site trunking/conventional functions are integrated in the repeater. The IP network capability extends your communication coverage and allows you to remotely control the repeater settings.

* Type-D Trunking and network controller functions are not available, depending on version.

D-SUB 25-pin Accessory Connector

The IC-FR5200H series has a programmable D-SUB 25-pin accessory connector for connecting external remote control devices. Also, modulation/demodulation signals can be input/output from the D-SUB connector.

Multiple CTCSS, DTCS Tone and RAN Code Decode

The IC-FR5200H series decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups.

Other features

  • CW ID transmission
  • ±0.5ppm high frequency stability (Digital mode)
  • 2U low profile for 19-inch rack mount
  • Digital voice scrambler provides 15-bit key (about 32,000 codes)
  • Built-in inversion voice scrambler (Analog mode)
  • Built-in audio compander (Analog mode)
  • PTT priority setting (Local Mic., external PTT or repeater operation)
  • 5-Tone and DTMF encoder/decoder (Analog mode)
  • Normal and priority scan
  • Convenient key assign stickers supplied
  • Beat cancel capability
  • Low voltage alert (Analog mode)

Rear panel view

rear panel view


  • IDAS and IDAS logo are trademarks of Icom Incorporated.
  • All other trademarks are the properties of their respective holders.