HOME > Products > Land Mobile > IDAS Digital Transceivers > IC-FR5200H, IC-FR6200H (dPMR Version)

IC-FR5200H, IC-FR6200H (dPMR Version)

photo
IC-FR5200H (dPMR Version)
vhfidas
IC-FR6200H (dPMR Version)
uhfidas
zoombrochure (PDF)Manual (PDF)

dPMR

Fanless dPMR™ Digital Repeater
Reliable 50 W Full Duty Operation

50W 100% Duty Cycle Operation

Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FR5200H series provides 50W output at 100% duty cycle operation. No internal cooling fan required.

dPMR™ Mode 3 Digital Trunking


dPMR Mode 3 (Click for larger image)
With the external controller, IC-FC5000E, the IC-FR5200H series can be used in a dPMR Mode 3 digital trunking system. A small number of communication channels are automatically and dynamically allocated to accommodate a large number of subscribers. The trunking sites can be interconnected over an IP network.

dPMR™ Mode 2, Analog FM and Mixed Mode

The IC-FR5200H series is compatible with both analog FM mode and dPMR single site conventional mode (Mode 2). Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and dPMR Mode 2 and to transmit either mode depending on the received signal.

32 Channel Capacity and 5 Programmable Buttons

The 12-digit dot-matrix display, 5 programmable buttons, 32 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. LEDs on the front panel show channel conditions.

Multiple CTCSS, DTCS Tone and CC Decode

The IC-FR5200H series decodes multiple CTCSS and DTCS as well as digital CC on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups.

19-inch Rack Mount, 2U Height Low Profile Design

The IC-FR5200H series uses only 2U height. This low profile configuration allows you to stack multiple units in an industry standard 19-inch rack and provides great space efficiency.

Other features

  • CW ID transmission
  • Digital voice scrambler provides 15-bit key (about 32,000 codes)
  • ±0.5ppm high frequency stability
  • D-SUB 25-pin accessory connector
  • Built-in inversion voice scrambler*
  • PTT priority setting (Local Mic., external PTT or repeater operation)
  • Built-in audio compander*
  • 5-Tone and DTMF encoder/decoder*
  • Normal and priority scan
  • Low voltage alert
  • Key assign stickers supplied
* Analog mode only.

Rear panel view

rear panel view


  • IDAS and IDAS logo are trademarks of Icom Incorporated.
  • dPMR and the dPMR logo are trademarks of the dPMR MoU Association.
  • All other trademarks are the properties of their respective holders.