 |
|
   |
General
| Frequency coverage |
USA version | TX: 144–148MHz, RX: 136–174MHz* |
|
|---|---|---|---|
| EXP version | TX/RX: 136–174MHz* | ||
| KOR, TPE versions | TX/RX: 144–146MHz | ||
| Number of channels | 207 channels (including 6 scan edges, and 1 call) |
||
| Type of emission | F2D, F3E (FM) | ||
| Power supply requirement | 13.8V DC ±15% | ||
| Current drain | Tx (65W) | 11A | |
| Rx | Stand-by | 0.4A | |
| Max. audio | 1.5A | ||
| Antenna impedance | 50Ω (SO-239) | ||
| Operating temperature range | –10°C to +60°C; 14°F to +140°F | ||
| Dimensions (projections not included; W×H×D) |
140×40×162 mm; 5.51×1.57×6.38 in |
||
| Weight (approx.) | 1.1 kg; 2.43lb | ||
Transmitter
| Output power (at 13.8V DC) |
USA, EXP versions | 65W, 25W, 10W, 5W |
|---|---|---|
| KOR version | 50W, 25W, 10W, 5W | |
| TPE version | 24W, 10W, 5W | |
| Max. frequency deviation | Wide | ±5.0kHz |
| Narrow | ±2.5kHz | |
| Spurious emissions | Less than –60dBc | |
| Frequency stability | ±3ppm | |
| Microphone impedance | 600Ω (8-pin modular) | |
Receiver
| Intermediate frequencies | 46.35MHz/450kHz | |
|---|---|---|
| Sensitivity at 12dB SINAD | Less than 0.18μV | |
| Adjacent channel selectivity |
Wide | More than 6kHz (at 6dB) Less than 14kHz (at 60dB) |
| Narrow | More than 3kHz (at 6dB) Less than 9kHz (at 55dB) |
|
| Spurious response rejection | More than 60dB | |
| Audio output power | 4.5W typ. (10% dist. 4Ω load) | |
| External speaker connector | 2-conductor 3.5 (d) mm (1⁄8ʺ)/4Ω | |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL 810G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
All stated specifications are subject to change without notice or obligation.