 |
|
   |
General
IC-F1710, IC-F1810 |
IC- F2710, IC-F2810 |
|||
|---|---|---|---|---|
| Frequency coverage (Varies according to version) |
136–174 MHz |
400-470 MHz |
||
| Number of channels | 256 ch/32 zones |
|||
| Channel spacing (Varies according to version) |
12.5/20/25 kHz |
|||
| Type of emission | 16K0F3E,14K0F3E,8K50F3E
|
|||
| Current drain | Tx High | 7A |
||
| Rx | Stand-by | 600mA |
||
| Max. audio | 1.2A |
|||
| Dimensions (projections not included; W×H×D) |
175×45×170 mm |
|||
| Weight (approx.) | 1.5kg |
|||
Transmitter
IC-F1710, IC-F1810 |
IC- F2710, IC-F2810 |
|
|---|---|---|
| RF output power (High) | 25W |
|
| Spurious emissions | 0.25μW (≦1GHz) |
|
| Frequency stability | ±0.85kHz |
±1.5kHz |
| Audio harmonic distortion | 3% typical 40% deviation |
|
| FM Hum and Noise | - |
|
Receiver
IC-F1710, IC-F1810 |
IC- F2710, IC-F2810 |
|
|---|---|---|
| Sensitivity at 20dB SINAD (emf) | –4dBμV (typ.) |
|
| Adjacent channel selectivity (W/M/N) | 80/80/75dB (typ.) |
|
| Spurious response rejection | 80dB |
|
| Intermodulation rejection | 70dB (typ.) |
|
| AF output power (at 10% distortion with a 4Ω load) |
4W (typ.) 22W (typ.)(External audio) |
|
FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS
IC-F1710, IC-F1810 |
||
|---|---|---|
| Number of option slots | 1 | |
| CTCSS/ DTCS | encoder | Available |
| decoder | Available | |
| 2-Tone | encoder | Available |
| decoder | Available | |
| 5-Tone | encoder | Available |
| decoder | Available | |
| DTMF autodial | Available | |
| DTMF decoder | Available* | |
| Voice Scrambler | Inversion | Available |
| Non-rolling | UT-109 (#02 requied.) |
|
| Rolling | UT-110 (#02 requied.) |
|
| BllS 1200 | Available | |
| MPT 1327 | - | |
| LTR™ trunking | - | |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F Method, Proc. |
|---|---|
| Low Pressure Storage (Altitude) | 500.4 I |
| Low Pressure Operation (Altitude) | 500.4 II |
| High Temperature Storage | 501.4 I |
| High Temperature Operation | 501.4 II |
| Low Temperature Storage | 502.4-3 I |
| Low Temperature Operation | 502.4-3 II |
| Temperature Shock | 503.4 I |
| Solar Radiation | 505.4 I |
| Humidity Induced | 507.4 |
| Humidity Aggravate | 507.4 |
| Salt Fog | 509.4 |
| Dust Blowing | 510.4 I |
| Vibration | 514.5 I |
| Shock Functional | 516.5 I |
| Shock Transit Drop | 516.5 IV |
Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.