IC-R20 | Products

General

	IC-R20
Frequency coverage (Differs according to version)	0.150–1304.999, 1305–3304.999MHz*¹ (VFO A): 0.150–469.999MHz (VFO B): 118–174.999, 330–1304.999MHz
Mode	FM, WFM, AM, USB, LSB, CW* * 0.150–469.999MHz only.
Frequency stability	±6ppm (–10°C to +60°C; +14°F to +140°F)
Current drain	Rated audio output*² : 150mA typ. (at 3.7V DC)
Battery pack or cells	BP-206, AA(R6)× 3 alkaline cells
External power supply requirement	6.0V DC (with BC-149A/D or CP-18A/E)
Antenna connector	BNC (50Ω)
Number of memory channels	1250 (including 200 auto memory write and 50 scan edges)
Dimensions (W×H×D; Projections are not included)	60×142×34.8 mm; 2³/₈×5¹⁹/3₂×1³/₈ in
Weight (approx.)	320g; 11.3oz (With antenna and BP-206)

	IC-R20
Sensitivity (typical, except spurious points)	FM (at 12dB SINAD): 1.620–4.999MHz 0.56μV 5.000–221.999MHz 0.4μV 330.000–832.999MHz 0.56μV 833.000–1304.999MHz 0.71μV 1330.000–2304.999MHz 5.6μV 2330.000–2999.999MHz 18μV WFM (at 12dB SINAD): 76.000–108.000MHz 1.8μV 175.000–221.999MHz 1.8μV 470.000–769.999MHz 2.5μV AM (at 10dB S/N): 0.495–4.999MHz 2.2μV 5.000–29.999MHz 1.4μV 118.000–135.999MHz 1.4μV SSB, CW (at 10dB S/N): 0.495–4.999MHz 0.4μV 5.000–29.999MHz 0.25μV 50.000–53.999MHz 0.25μV 118.000–146.999MHz 0.25μV 330.000–469.999MHz 0.32μV
Selectivity	AM, FM: 12kHz/–6dB 30kHz/–60dB WFM: 150kHz/–6dB SSB, CW: 1.8kHz/–6dB
AF power (at 10% distortion)	100mW typical with an 8Ω load
External speaker connector	2-conductor 3.5 (d) mm (¹/₈'' )/8Ω

*1 Cellular bands are blocked in the USA version.
*2 Single receive mode, IC recorder OFF.

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Also meets equivalent MIL-STD-810 -C, -D and -E.

All stated specifications are subject to change without notice or obligation.