• features
• spec
• option

General

	IC-R5
Frequency coverage (Differs according to version)	0.150–1309.995MHz*1
Mode	FM, WFM, AM
Frequency stability	±6ppm (–10°C to +60°C; +14°F to +140°F)
Current drain	Rated audio output: 170mA typ. (at 3.0V DC)
Battery pack or cells	AA(R6)× 2 alkaline cells
External power supply requirement	6.0V DC (with BC-149A/D or CP-18A/E)
Antenna connector	SMA (50Ω)
Number of memory channels	1250 (including 200 auto memory write and 50 scan edges)
Dimensions (W×H×D; Projections are not included)	58×86×27 mm; 29⁄32×33⁄8×11⁄16 in
Weight (approx.)	185g; 6.5lb (With antenna and battery cells)

Receiver

	IC-R5
Sensitivity (typical, except spurious points)	FM (at 12dB SINAD): 1.625–4.995MHz 0.32μV 5.000–117.995MHz 0.2μV 118.000–246.995MHz 0.18μV 247.000–329.995MHz 0.2μV 330.000–469.995MHz 0.18μV 470.000–999.995MHz 0.28μV* 1000.000–1309.995MHz 0.35μV * USA version only 470.000–821.995MHz 0.28μV 851.000–866.995MHz 0.71μV 896.000–999.995MHz 0.28μV WFM (at 12dB SINAD): 76.000–107.995MHz 0.89μV 175.000–221.995MHz 0.71μV 470.000–769.995MHz 1.0μV AM (at 10dB S/N): 0.495–4.995MHz 1.3μV 5.000–29.995MHz 0.71μV 118.000–136.000MHz 0.56μV 222.000–246.995MHz 0.56μV 247.000–329.995MHz 0.71μV
Selectivity	AM, FM: 15kHz/–9dB 30kHz/–60dB WFM: 150kHz/–6dB
AF power (at 10% distortion)	100mW typical with an 8Ω load
External speaker connector	2-conductor 3.5 (d) mm (1⁄8″)/8Ω

* Cellular bands are blocked in the USA version.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard	MIL-810 F Method, Proc.
Low Pressure	500.4 I,II
High Temperature	501.4 I,II
Low Temperature	502.4 I,II
Temperature Shock	503.4 I
Solar Radiation	505.4 I
Rain	506.4 I,II
Humidity	507.4
Salt Fog	509.4
Dust Blowing	510.4 I
Vibration	514.5 I
Shock	516.5 I,IV

Also meets equivalent MIL-STD-810 -C, -D and -E.

All stated specifications are subject to change without notice or obligation.