IC-R6 | Products | Icom Inc

General

	IC-R6
Frequency coverage (Differs according to version)	0.100–1309.995MHz*
Mode	AM, FM, WFM
Frequency stability	±1.0ppm (at 25°C)
Current drain	Rated audio output: 130mA typ. (Ext. SP, backlight off)
Battery pack or cells	2×R6 (AA) size Ni-MH or alkaline cells
External power supply requirement	4.5V DC rated (4.5 - 6.3V with BC- 196SA/SD, CP-18A/E)
Antenna impedance	50Ω (SMA)
Number of memory channels	1250 (including 200 auto memory write and 50 scan edges)
Dimensions (W×H×D; Projections are not included)	58×86×29.8 mm; 2⁹⁄₃₂×3³⁄₈×1³⁄₁₆ in
Weight (approx.)	200g; 7.1oz

	IC-R6
Sensitivity (typical, except spurious points)	FM (at 12dB SINAD): 1.625MHz– 4.995MHz 0.32μV typ. 5.000MHz– 29.995MHz 0.25μV typ. 30.000MHz– 117.995MHz 0.18μV typ. 118.000MHz– 246.995MHz 0.18μV typ. 247.000MHz– 469.995MHz 0.18μV typ. 470.000MHz– 832.995MHz 0.32μV typ. 833.000MHz–1029.995MHz 0.28μV typ. 1030.000MHz–1309.995MHz 0.35μV typ. WFM (at 12dB SINAD): 76.000MHz– 108.000MHz 1.1μV typ. 175.000MHz– 221.995MHz 1.1μV typ. 470.000MHz– 770.000MHz 1.8μV typ. AM (at 10dB S/N): 0.495MHz– 4.995MHz 1.3μV typ. 5.000MHz– 29.995MHz 0.89μV typ. 118.000MHz– 136.000MHz 0.63μV typ. 222.000MHz– 246.995MHz 0.63μV typ. 247.000MHz– 329.995MHz 0.79μV typ.
Selectivity	AM, FM: More than 12kHz/–9dB, Less than 30kHz/–60dB WFM: More than 150kHz/–6dB
AF power (at 10% distortion)	Internal speaker (16Ω load) More than 150mW External speaker (8Ω load) 80mW typ.
External speaker connector	3-conductor 3.5 (d) mm (¹⁄₈″)/8Ω

* Cellular bands are blocked in the USA version.

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Also meets equivalent MIL-STD-810 -C, -D and -E.

Water	IPX2 (Drip resistant)

All stated specifications are subject to change without notice or obligation.