 |
|
   |
General
IC-R9500 |
|
|---|---|
| Frequency coverage (Differs according to version) |
0.005-3335.000000MHz*1 |
| Mode | USB, LSB, CW, FSK, AM, FM,
WFM, P25* * Optional UT-122 required. |
| Frequency stability | ±0.05ppm (25°C; after 5 min. warm up) |
| Maximum current drain | 100VA (Power consumption) |
| Power supply requirement | 100, 120, 230, 240V AC |
| Antenna connector | SO-239 (50Ω for HF) Phono (RCA: 500Ω for HF) Type-N × 2 (50Ω*2) |
| Number of memory channels | 1220 (including 100 auto memory write, 100 memory scan skip and 20 scan edges) |
| Dimensions (W×H×D; Projections are not included) |
424×149×340 mm; 1611⁄16×57⁄8×133⁄8 in |
| Weight (approx.) | 20kg; 44.1lb |
Receiver
IC-R9500 |
|
|---|---|
| Sensitivity (typical) SSB, CW, RTTY, AM: at 10dB S/N FM, WFM: at 12dB SINAD |
SSB, CW, FSK (BW=2.4kHz): 0.1-1.799MHz 0.5μV (Preamp1 ON) 1.8-29.999MHz 0.2μV (Preamp1 ON) 30-2999.999MHz 0.32μV (Preamp ON) 3000-3335MHz 1.0μV (Preamp ON) AM (6.0kHz): 0.1-1.799MHz 6.3μV (Preamp1 ON) 1.8-29.999MHz 2.5μV (Preamp1 ON) 30-2999.999MHz 3.5μV (Preamp ON) 3000-3335MHz 11μV (Preamp ON) FM (15kHz): 28-29.999MHz 0.5μV (Preamp1 ON) 30-2999.999MHz 0.5μV (Preamp ON) 3000-3335MHz 1.6μV (Preamp ON) FM50k (50kHz) : 28-29.999MHz 0.71μV (Preamp1 ON) 30-2999.999MHz 0.71μV (Preamp ON) 3000-3335MHz 2.2μV (Preamp ON) WFM (180kHz): 30-2999.999MHz 1.4μV (Preamp ON) 3000-3335MHz 4.5μV (Preamp ON) |
| Selectivity | SSB, FSK: (BW=2.4kHz*) 2.4kHz/-3dB 3.6kHz/-60dB CW (500Hz): 500Hz/-3dB 700Hz/-60dB AM (6kHz): 6.0kHz/-3dB 15.0kHz/-60dB FM (15kHz): 12kHz/-3dB 25kHz/-60dB WFM: 180kHz/-6dB *variable between 50Hz and 3.6kHz |
| Spurious and image rejection | More than 70dB (0.1-30MHz) More than 50dB (30-2500MHz) More than 40dB (2500-3000MHz) |
| AF power (at 10% distortion) | 2.6W with an 8Ω load |
| External speaker connector | 2-conductor 3.5 (d) mm (1/8'')/8Ω |
*2 One each for 30-1149.999MHz, 1150-3335MHz
* The LCD display may have cosmetic imperfections that appear as small or dark spots. This is not a malfunction or defect, but a normal characteristic of LCD displays.
All stated specifications are subject to change without notice or obligation.
If re-exporting the IC-R9500, it is your responsibility to check you are in compliance with the export regulations of your country or the country you are exporting to.
Export regulations can be highly restrictive in relation to some of the technology implemented in this product.
Your failure to comply with export regulations may subject you to fines or penalties. Please consult with the relevant Government Department in your country.