Firmware Updates / Software Downloads

Network/RoIP

Model name AP-90M
Download Type Firmware
Version Version 2.08
Update 2015/11/19
Note

Improvements

  1. The [Rate] and [WMM Advanced] Setting screen layout has been changed.
  2. The firmware update fixes a problem where the wireless communication fails when the Authentication setting is [Shared Key].
  3. The firmware update fixes a problem that the automatic channel setting function may not work properly for [Wireless 2] (external antenna.)
  4. The firmware update fixes a problem that the Wireless Bridging function may not work properly when selecting 2.4GHz for Frequency Band, and selecting [Automatic] for Channel, in [Wireless 2] setting.
  5. The firmware update fixes a problem so that the LEDs light when an error occurs, even if the LED OFF Mode is set to “Enable” or “Enable (Completely)”.
File Type ZIP
File Size 3.48MB
Manual AP-90M

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous