Firmware Updates / Software Downloads

Transceiver

Model name IC-7800
Download Type Firmware
Version Ver.3.00
Update 2013/11/29
Note

Improvements

  1. Waterfall screens, mouse operation, and other additional functions on the bandscope have been added.
  2. An audio scope function has been added.
  3. The USB connector now also accepts USB flash drives or a USB mouse.
  4. The Voice Recording function recording time has been increased.
  5. Transmission recording capability has been added.
  6. Remotely control the transceiver without needing a Base (server) PC.
    (RS-BA1 Ver.1.50 or later is required)
  7. Frequency band expansion (On some transceiver versions).

For more information, please refer to "IC-7800 Information for Firmware version 3.00"

  • Thoroughly read Section 16 (UPDATING THE FIRMWARE) of the instruction manual (here) for details of what the update requires.
  • Backup your transceiver's data onto a CF card as it is possible that your data could get lost or corrupted during the update.
  • Never turn OFF the transceiver power during the update.
  • The firmware update utility is necessary when updating the firmware through a LAN. Download the utility here.
File Type ZIP
File Size 4.09MB
Manual IC-7800

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous