Firmware Updates / Software Downloads

Network/RoIP

Model name VE-PG3
Download Type Firmware
Version Version 2.03
Update 2014/10/21
Notes

Improvements are listed below.

Bridge mode:
• dPMR Mode 2 is supported
• IP100H Bridge mode connection is supported
• Serial control of the IC-F5060/F6060 series is supported
• Serial communication between VE-PG3s is supported
• The "Call Back RX to TX" function is added to the "Transceiver Control" setting


Converter mode:
• dPMR Mode 2 is supported
• Serial communication between VE-PG3s is supported
• The "Call Back RX to TX" function is added to the "Transceiver Control" setting
• Squelch control from a transceiver is supported
• The "Always Send during Talking" item is added to the "PTT Control Type from the Telephone" setting
• A busy tone is added when a target of the IP100Hs or the IP100FSs is not connected to the system, or is out of range*1

*1 To use this function, the following firmware are necessary
• IP1000C version 1.33 or later
• IP100H version 1.33 or later
• IP100FS version 1.31 or later


Notice:
• If you update to version 2.03 from version 1.32 or earlier, you cannot downgrade to version 1.32 or earlier again.
• You cannot use setting files made by version 2.03 or later using version 1.32 or earlier.

File Type ZIP
File Size 3.71MB
Manual VE-PG3

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous