Firmware Updates / Software Downloads

Communications Receiver

Model name IC-R30
Download Type Firmware
Version Version 1.10 for USA version
Update 2018/09/14
Notes

This firmware is for the USA version that has a serial number beginning with "16".

Changes in this version

  • Remote control operation with RS-R30I.
  • Automatic backlighting is improved.
  • Some restrictions of program scan edge settings are eliminated.
  • Skip function is improved.
  • Duplex check function during the memory scan is added.
  • Duplex scan function is added.
  • Memory group and group link settings are connected.
  • Channel UP/DOWN is available across channel groups in the Memory mode.
  • Bluetooth® SCO Link can be automatically disconnected when there is no audio.
  • Volume of a Bluetooth® headset and the IC-R30 can be separately set.
  • Battery condition information is added.
  • The record file management system is improved.

Click here for more details

To update the firmware

  • Thoroughly read Section 2 microSD CARD and Section 9 UPDATING THE FIRMWARE in the ADVANCED MANUAL, and follow the instructions displayed on the IC-R30.
  • BE SURE to make a backup copy of your data settings before updating the firmware.
  • The firmware will be updated to the following versions.
    CPU to Version 1.10
    DSP to Version 1.03
File Type zip
File Size 1.86MB
Manual IC-R30

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous