Firmware Updates / Software Downloads

Communications Receiver

Model name IC-R9500
Download Type Firmware
Version Ver.1.07 Any other (non-USA) version



If your serial number starts from other than "020xxxxxx", you can install this firmware for the update.

What is improved?
  • The bass audio when receiving AM broadcast in SSB mode has been improved.
  • The performance of the S-meter display in the shortwave band range is improved when the receive band is switched.
  • The operation of the band-scope is improved when an external reference device is connected.

  • Please save your memory and setting data to internal memory (CF card) or USB memory before the firmware update.
  • Do not turn OFF the receiver during the firmware update.
  • Before downloading, please read through "Section 15" of the IC-R9500's instruction manual.
  • If you want to update the firmware via LAN, please also download this Firmware update utility;
File Type ZIP
File Size 3.45MB
Manual IC-R9500

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.