Firmware Updates / Software Downloads


Model name RS-BA1
Download Type Control software
Version Ver.1.40
Update 2013/06/28
Note Major improvements of the function-
  1. IC-7100 is now supported.
  2. Improved for stable operation with RC-28 after your PC comes out of the sleep mode.
  • When you update the control software:
    1. Download and expand the "".
    2. Double-click "Update.exe" to start up the software update.
    3. Follow the instructions displayed on the screen.
  • The RS-BA1 must be installed on your PC to update the program.
  • The RC-28 firmware must be updated at the same time to the user that RC-28 is used. Download the latest firmware version from here.
  • Only execute the "Recover_Setup_Rsba1.reg" file when you need to reinitialize the RS-BA1's settings.
File Type ZIP
File Size 22.6MB

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.