Firmware Updates / Software Downloads


Model name IC-7600
Download Type Firmware
Version Version.2.00
Update 2015/05/18


  • Waterfall screens, mouse operation, and other additional functions have been added to the spectrum scope.
  • An APF AF Level setting has been added.
  • CI-V commands for antenna control, logging software and RIT/DELTA-TX have been added.
  • TX Delay (HF/50M) settings have been added to adjust the TX delay time.
  • A Standby setting has been added to remotely turn ON the IC-7600 transceiver by a command from the REMOTE jack.
  • "MOS-FET" is now the default value of "SEND Relay Type."
  • For more information, please refer to IC-7600 Information for Firmware version 2.00.
  • ・The firmware can be updated using a USB flash drive. Thoroughly read Section 14 (UPDATING THE FIRMWARE) of the instruction manual to know what the update requires.
  • ・Backup your transceiver’s data onto a USB flash drive as it is possible that your data could get lost or corrupted during the update. Thoroughly read Section 10 (File saving) of the instruction manual for details.
  • ・Never turn OFF the transceiver power during the update.
File Type ZIP
File Size 2.61MB
Manual IC-7600

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.