Firmware Updates / Software Downloads

Transceiver

Model name IC-7100/IC-7200/IC-7410/IC-7600/IC-9100
Download Type USB Driver
Version Ver.1.10
Update 2013/06/28
Note

The supported OS is added: Microsoft® Windows® 8 (32/64 bit,　except "RT" versions). The USB driver isn’t changed previous one. USB driver installation guide is revised only.

  • The driver supports the following radios (as of June 2013); After installing the driver, connect the radio to the PC, and then the USB driver is automatically installed to add a COM port.

    ・IC-7100
    ・IC-7200
    ・IC-7410
    ・IC-7600
    ・IC-9100
  • Before downloading the driver, please thoroughly read "USB driver installation guide" for installation details and what is required for the installation.
  • This driver is for Windows® XP, Windows Vista®, Windows® 7, and Windows® 8 (except "RT" versions) only. If you require to a USB driver for Windows® 98SE/Me/2000, please use Ver.1.00 of the driver.
File Type ZIP
File Size 3.11MB
Manual IC-7200/7600

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous
Top of Page