HOME > Support > Firmware Updates / Software Downloads > IC-7100/IC-7200/IC-7410/IC-7600/IC-9100

Firmware Updates / Software Downloads

Transceiver

Model name IC-7100/IC-7200/IC-7300/IC-7410/IC-7600/IC-7850/IC-7851/IC-9100/IC-R8600
Download Type USB Driver
Version Version 1.20
Update 2013/08/01
Note
      The IC-R8600 is now supported.

  • The driver supports the following transceivers and receivers (as of July 2017). After installing the driver, connect the transceiver or receiver to the PC, and then the USB driver is automatically installed to add a COM port.

    ・IC-7100
    ・IC-7200
    ・IC-7300
    ・IC-7410
    ・IC-7600
    ・IC-7850
    ・IC-7851
    ・IC-9100
    ・IC-R8600
  • Before downloading the driver, please thoroughly read "USB driver installation guide" for installation details and what is required for the installation.
  • This driver is for only Windows® XP, Windows Vista®, Windows® 7, Windows® 8 (except "RT" versions), and Windows® 10.
File Type ZIP
File Size 3.50MB
Manual IC-7100/IC-7200/IC-7300/IC-7410/IC-7600/IC-7850/IC-7851/IC-9100

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous