Firmware Updates / Software Downloads

Transceiver

Model name IC-7610
Download Type Firmware
Version Version 1.03
Update 2017/11/20
Notes

Changes in this version

  • Incorrect indications on the transmit meters, while in the Dual scope mode, have been fixed.
  • Default setting of the SET MODE item "AF/IF XFC Output (SPLIT ON)" for the ACC socket has been changed to MAIN.
  • Optimized the internal antenna tuner operation when an Icom external antenna tuner is connected.

To update the firmware

  • Thoroughly read Section 6. SD CARD/USB FLASH DRIVE of the BASIC MANUAL and the Section 13. UPDATING THE FIRMWARE of the ADVANCED MANUAL and follow the instructions appeared on the display of the IC-7610.
  • The firmware will be updated to the following versions.
    Main CPU: 1.03
    Sub CPU: 1.01
    Front CPU: 1.00
    FPGA: 1.02
File Type ZIP
File Size 7.58MB
Manual IC-7610

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous