Firmware Updates / Software Downloads


Model name IC-7700
Download Type Firmware
Version Ver.2.00
Update 2014/03/26


  1. Waterfall screens, mouse operation, and other additional functions on the bandscope have been added.
  2. An audio scope function has been added.
  3. The USB connector now also accepts a USB mouse.
  4. The Voice Recording function recording time has been increased.
  5. Transmission recording capability has been added.
  6. Remotely control the transceiver without needing a Base (server) PC. (RS-BA1 Ver.1.60 or later is required)
  7. Frequency band expansion (On some transceiver versions).
For more information, please refer to "IC-7700 Information for Firmware version 2.00"
  • Thoroughly read Section 16 (UPDATING THE FIRMWARE) of the instruction manual (here) for details of what the update requires.
  • Backup your transceiver's data onto a USB flash drive as it is possible that your data could get lost or corrupted during the update.
  • Never turn OFF the transceiver power during the update.
  • The firmware update utility is necessary when updating the firmware through a LAN. Download the utility here.
File Type ZIP
File Size 3.44MB
Manual IC-7700

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.