Firmware Updates / Software Downloads

Transceiver

Model name IC-7800
Download Type Firmware
Version Ver.2.03
Update 2006/05/30
Note Features
  • Improved monitor sound quality in SSB mode during TX.
  • Improved frequency characteristics of Digital IF Filter. The peak of the Digital IF Filter can be adjusted to center frequency without missing the action. When "Soft" filter shape is selected in SSB mode, center frequency of pass-bandwidth becomes peak. Under previous revision firmware, 1.5 kHz of pass-bandwidth is set as peak.
  • And more...
  • 3 kHz roofing filter is available in addition to the 15 kHz and 6 kHz filters, if your IC-7800 is upgraded.
  • Please save the setting data of IC-7800 to CF card before starting firmware update.
  • Never cut off power supply while updating firmware.
  • Before starting download, please read Firmware update information (V120E) pdf (2.75MB) carefully and make sure what is required for firmware update.
  • Firmware update using LAN needs the Firmware update utility VER.1.0 ZIP (256KB) Please download this software, too.
File Type ZIP
File Size 3.76MB
Manual IC-7800

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous