Firmware Updates / Software Downloads

Transceiver

Model name IC-7800
Download Type Firmware
Version Ver.3.01
Update 2014/03/28
Note

Improvement
Improved remote control of the IC-7800, without needing a Base (server) PC. (RS-BA1 version 1.60 or later required.)
- Improved to prevent voice skip when a network delay and/or high packet loss occurs.
- Improved to prevent voice delay.

  • Thoroughly read Section 16 (UPDATING THE FIRMWARE) of the instruction manual (here) for details of what the update requires.
  • Backup your transceiver's data onto a CF card as it is possible that your data could get lost or corrupted during the update.
  • Never turn OFF the transceiver power during the update.
  • The firmware update utility is necessary when updating the firmware through a LAN. Download the utility here.
File Type ZIP
File Size 4.09MB
Manual IC-7800

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous