HOME > Support > Firmware Updates / Software Downloads > IC-R1500 / IC-PCR1500 / IC-R2500 / IC-PCR2500

Firmware Updates / Software Downloads

Communications Receiver

Model name IC-R1500 / IC-PCR1500 / IC-R2500 / IC-PCR2500
Download Type Control software
Version Ver.2.201
Update 2013/10/01
Note

Read this information carefully before clicking the "Agree" button below to download the firmware.

Improvement

  1. USB 3.0 is now supported.

Note

  • Please read "Control software update information" thoroughly and make sure what is required for the update.
  • Before downloading the driver, please thoroughly read "USB driver installation guide" for installation details and what is required for the installation.
  • The control software version 2.201 must be used with the receiver firmware version 2.10. Download the firmware version here.
  • Save the receiver's setting and memory data before starting the update.
  • The software version 2.201 is for Windows® XP, Windows Vista®, Windows® 7 and Windows® 8.
  • If you require the control software and USB driver for Windows® 98SE/Me/2000, please use verion 2.11 of the software and driver.
File Type ZIP
File Size 7.73MB
Manual IC-R1500 / IC-PCR1500 / IC-R2500 / IC-PCR2500

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.




Previous